Fujitsu TX150 S3 사용자 설명서

12

Options Guide

 U41604-Z156-1-76

Systems and components that might be damaged by electrostatic discharge 
(ESD) are marked with the following label:

Figure 1: ESD label

When you handle components fitted with ESDs, you must observe the following 
points under all circumstances:

●

Remove the power plug from the power socket before inserting or removing 
components containing ESDs.

●

You must always discharge yourself of static charges (e.g. by touching a 
grounded object) before working.

●

The equipment and tools you use must be free of static charges.

●

Only touch the components at the positions highlighted in green (touch 
points).

●

Do not touch any exposed pins or conductors on a component.

●

Use a grounding cable designed for this purpose to connect yourself to the 
system unit as you install components.

●

Place all components on a static-safe base.

I

You will find a detailed description for handling ESD components in the 
relevant European or international standards (DIN EN 61340-5-1, 
ANSI/ESD S20.20).