Hitachi 8880R 사용자 설명서
Ch 2: System Environment Setting
50
Hitachi VisionBase 8880R Server
Returning the Settings to Defaults
This section explains how to return the settings to defaults and what action to take when you cannot start the utility.
Read this section as required.
Read this section as required.
Returning the Settings of the Setup Information to Defaults
Referring to “Load Setup Defaults” in “What You Can Do on the Exit Menu” on page 35, return the settings of the
Setup information to defaults. After that, be sure to change the settings against “List of Utility Settings” on page 50.
Setup information to defaults. After that, be sure to change the settings against “List of Utility Settings” on page 50.
Returning the ICU Settings to Defaults
1.
“Restoring Configuration Information” on page 47, return the settings top defaults.
2.
“List of Utility Settings” below, change the settings to Hitachi VisionBase 8880R Server settings.
List of Utility Settings
ICU (ISA Configuration Utility)
This table defines the ICU factory default settings.
Item
Default Setting Value
Motherboard System Device
ISA Bridge
Fixed Configuration
System Peripheral
Fixed Configuration
RAM Controller
Fixed Configuration
DMA Controller
Fixed Configuration
Interrupt Controller
Fixed Configuration
System Timer Controller
Fixed Configuration
Real Time Clock Controller
Fixed Configuration
Keyboard Controller
Fixed Configuration
CPU
Fixed Configuration
Multi-Media Audio Controller
Fixed Configuration
PCI Bridge
Fixed Configuration
Serial port
IRQ
DMA
Memory [Hex]
I/O port [Hex]
DMA
Memory [Hex]
I/O port [Hex]
Choice 1
4
None
None
3f8–3ff
4
None
None
3f8–3ff
Floppy Controller
IRQ
DMA
Memory [Hex]
I/O port [Hex]
DMA
Memory [Hex]
I/O port [Hex]
Choice 1
6
2
None
3f0–3f5
3f7
6
2
None
3f0–3f5
3f7