Fujitsu MX130 S2 사용자 설명서
MX130 S2
Upgrade and Maintenance Manual
209
System board and components
I
For detailed information on how to access the BIOS and modify
settings, refer to the "Description - BIOS Manual D3090 / D3091"
available online at
settings, refer to the "Description - BIOS Manual D3090 / D3091"
available online at
or from the ServerView
Suite DVD 2 supplied with your PRIMERGY server.
Ê
If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
maintenance task, re-enable BitLocker as described in section
12.2.2 Removing the TPM board
V
CAUTION!
Advise your contact persons that they must provide you with TPM
backup copies. For security reasons, the TPM must be restored/re-
saved by the customer. After installing a new system board, the TPM
must be enabled. You may not clear the TPM data.
backup copies. For security reasons, the TPM must be restored/re-
saved by the customer. After installing a new system board, the TPM
must be enabled. You may not clear the TPM data.
If the contact persons DO NOT have a backup copy available, inform
them that replacing the TPM board will cause to lose all data.
them that replacing the TPM board will cause to lose all data.
12.2.2.1 Required tools
●
Preliminary and concluding steps: tool-less
●
Removing the system board:
– Phillips PH2 / (+) No. 2 screw driver
●
Removing the TPM:
– thin slotted screw driver (
2 x 0.4 mm)
For the Japanese market:
– Dedicated TPM screw driver (CWZ8291A)
Field Replaceable Units (FRU)
Average task duration: 30 minutes