Lucent Technologies 2500 사용자 설명서
DEFINITY® Enterprise Communications Server Release 7
Console Operations
Console Operations
555-230-700
Issue 4
June 1999
Centralized Attendant Service
67
Identifying Differences in a CAS Environment
5
Using CAS Operating Procedures
Operating procedures for CAS environments work similarly to standard
environments. However, transferring calls, placing calls on hold, console backup
services, and night service function differently in CAS environments. The
following section describes these procedures in detail.
environments. However, transferring calls, placing calls on hold, console backup
services, and night service function differently in CAS environments. The
following section describes these procedures in detail.
Transferring CAS Calls
To transfer CAS calls:
1. Press the
CALL APPEARANCE
button.
2. Listen for a call identification tone (if provided by the branch).
3. Press the
START
button.
4. Listen for a dial tone.
NOTE:
Do not continue until you hear a dial tone. The call does not go
through if you proceed before the dial tone sounds.
through if you proceed before the dial tone sounds.
5. Dial the requested internal or external number.
6. Select one of the following options:
■
If you are not going to announce the call, press the
RELEASE
button
as soon as the call starts to ring.
or
■
If you are going to announce the call, wait for the called party to
answer. When the called party accepts the call, press the
answer. When the called party accepts the call, press the
RELEASE
button.
If the called party declines to talk to the caller, press the
CANCEL
button to reconnect with the caller.
Explain to the caller that the called party is not available; take a
message or ask the caller to try again later; then press the
message or ask the caller to try again later; then press the
RELEASE
button.
or
■
If the called party, is busy or doesn’t answer, press the
CANCEL
button to reconnect with the caller.