Netgear RNDP6310-100NAS 사용자 설명서
29
ReadyNAS Desktop Storage Systems
WARNING!
Use the skip volume check boot mode only when instructed to do
so by a NETGEAR Technical Support representative, otherwise
data loss might occur.
so by a NETGEAR Technical Support representative, otherwise
data loss might occur.
•
Memory test. Performs a memory test. The pass or fail result is reported on the status
display screen.
•
Disk test. Performs an offline full disk test. This can take 4 hours or more depending on
the size of your disks. Any problems are reported on the status display screen or in the
RAIDar discovery tool.
RAIDar discovery tool.
To access the boot menu:
1.
Power off your unit.
2.
Using a straightened paper clip, press and hold the Reset button.
3.
Press the Power button to power on the unit.
4.
Continue to press the Reset button until the status display screen shows a boot menu
message.
message.
5.
Press the Backup button to scroll through the boot mode options.
The status display screen shows the current boot mode option.
6.
When the status display screen shows the boot mode you need, press and release Reset
button to confirm your boot menu selection.
button to confirm your boot menu selection.
The system boots in the selected boot mode.