Netgear RNDP6310-100NAS 사용자 설명서

General Safety Precautions

Follow these rules to ensure general safety:

Keep the area around the ReadyNAS clean and free of clutter.

See the technical specifications in this manual for details about your specific ReadyNAS 

Ultra unit.

Replace the on-board battery only with the same battery or an equivalent type of battery 

recommended by the manufacturer. Dispose of used batteries according to the 
manufacturer's instructions.

Installing the battery upside down reverses its polarities and creates a 
danger of explosion. 

Main board replaceable soldered-in fuses: Only trained service technicians can replace 

the self-resetting PTC (positive temperature coefficient) fuses on the main board, using 
only new fuses that are the same as or equivalent to the ones being replaced. Contact 
Technical Support for details and support.

Electrostatic Discharge (ESD) Precautions

Electrostatic discharge (ESD) is generated by two objects with different 
electrical charges coming into contact with each other. An electrical 
discharge is created to neutralize this difference, which can damage 
electronic components and printed circuit boards. The following measures 
are generally sufficient to neutralize this difference before contact is made 
to protect your equipment from ESD:

Use a grounded wrist strap designed to prevent static discharge.

Keep all components and printed circuit boards (PCBs) in their antistatic bags until ready 
for use.

Touch a grounded metal object before removing the board from the antistatic bag.

Do not let components or PCBs come into contact with your clothing, which might retain a 

charge even if you are wearing a wrist strap.

Handle a board by its edges only; do not touch its components, peripheral chips, memory 

modules, or contacts.

When handling chips or modules, avoid touching their pins.

Put the main board and peripherals back into their antistatic bags when not in use.

For grounding purposes, make sure your computer chassis provides excellent 

conductivity between the power supply, the case, the mounting fasteners and the main 
board.