NCR S26 사용자 설명서

Sample RAID Configuration

NCR S26 Hot Plug Server User Guide

C-17

On Board PS/2 Mouse (IRQ 12)

[Enabled]

Setup Password

[None]

Power On Password

[None]

2. Press Esc to return to the main menu in BIOS Setup.

To configure the PCI adapters, follow these steps:

1. Select PCI System Configuration from the main menu in BIOS Setup.

2. Change the PCI IRQ Setting to [Manual]. Then use the up and down

arrow keys to select the PCI slot number. Use the right and left arrow
keys to change the IRQ Level for INTA Pin settings.

–  Available IRQ settings for primary PCI Bus (Slots 1 and 2, video,

and SCSI) are 3, 4 ,5, 7, 9, 10, 11, 14, and 15.

–  Available IRQ settings for secondary PCI Bus (Slots 3, 4, and 5) are

4, 9, 10, 11, 14, and 15.

–  To make IRQ 3 available for selection, you must disable Serial Port 2

in the System Security menu.

–  To make IRQ 4 available for selection, you must disable Serial Port 1

in the System Security menu.

–  To make IRQ 7 available for selection, you must disable Parallel Port

1 in the System Security menu.

–  To make IRQ 14 available for selection, you must disable On Board

IDE in the Basic Security Configuration menu.

3. Make the following settings:

–  PCI IRQ setting to Manual
–  PCI slot 1 (Mylex PCI RAID Adapter) to IRQ 14
–  PCI slot 2 (PCI Token Ring Adapter Olicom OC-3136) to IRQ 10
–  PCI slot 3 (PCI Ethernet Adapter SMC8432BTA) to IRQ 9
–  On Board VGA to IRQ 5