Raritan Computer SX4 사용자 설명서
A
PPENDIX
E:
C
ONFIGURING
C
ISCO
ACS
RADIUS
S
ERVER
115
Appendix E: Configuring Cisco ACS RADIUS
Server
Use the following procedure to configure the Cisco RADIUS server so that you can work with Dominion
SX. It is assumed here that Administrators are familiar with setting up and configuring the RADIUS server.
In order for Dominion SX to support RADIUS, both the unit and the user information must be added into
the RADIUS configuration.
Only Version 3.0 has been validated; however, other versions of the RADIUS server should operate with
the unit. Only the user’s role can be controlled on the unit using the RADIUS (IETF) option.
SX. It is assumed here that Administrators are familiar with setting up and configuring the RADIUS server.
In order for Dominion SX to support RADIUS, both the unit and the user information must be added into
the RADIUS configuration.
Only Version 3.0 has been validated; however, other versions of the RADIUS server should operate with
the unit. Only the user’s role can be controlled on the unit using the RADIUS (IETF) option.
Note: Access restrictions to specific ports on the unit cannot be controlled.
1. Log on to Cisco ACS Server using the browser.
Figure 91 Cisco ACS Main Display
2. Click on the [Network Configuration] button in the left panel of the screen and select Add Entry to
add/edit AAA Client. This must be done for each unit that is going to accessed via RADIUS. Click on
the Authenticate Using drop-down menu and select RADIUS (IETF) from this list. Click on the
[Submit] button.
the Authenticate Using drop-down menu and select RADIUS (IETF) from this list. Click on the
[Submit] button.
Figure 92 Unit Configuration Display