ASUS PS4 사용자 설명서

5-10

Chapter 5: BIOS setup

The items in this menu allow you to set or change the configurations for the SATA 

devices installed in the system. Select an item then press <Enter> if you wish to 

configure the item.

The BIOS automatically detects the values opposite the dimmed items (Device, 

Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and 

S.M.A.R.T. monitoring). These values are not user-configurable. These items show 

Not Detected if no SATA device is installed in the system.

Selects the type of SATA drive. Setting to [Auto] allows automatic selection of the 

appropriate SATA device type. Select [CDROM] if you are specifically configuring a 

CD-ROM drive. Select [ARMD] (ATAPI Removable Media Device) if your device is 

either a ZIP, LS-120, or MO drive. 

Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]

This item appears in SATA 5/6 only.

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the 

device supports this mode, and if the device was not previously formatted with LBA 

mode disabled. Configuration options: [Disabled] [Auto]

Enables or disables data multi-sectors transfers. When set to [Auto], the data 

transfer from and to the device occurs multiple sectors at a time if the device 

supports multi-sector transfer feature. When set to [Disabled], the data transfer 

from and to the device occurs one sector at a time. 

Configuration options: [Disabled] [Auto]

←→

↑↓