Avocent ACS 6000 사용자 설명서

다운로드
페이지 70
1
C H A P T E R
1
Introduction, Navigation and 
Commands
The Cyclades ACS 6000 advanced console server is a 1U appliance that serves as a single point for 
access and administration of connected devices, such as target device consoles, modems and power 
devices. ACS 6000 console servers support secure remote data center management and out-of-band 
management of IT assets from any location worldwide.
On ACS 6000 advanced console servers, administration can be performed and connected devices 
can be accessed with the Command Line Interface (CLI) utility, with the Web Manager or with 
DSView
®
 3 management software (version 3.5.1 and greater). Multiple users and administrators 
can be logged into the console server and connected to ports at the same time.
This manual describes how to access and navigate the CLI utility and how to use it after the console 
server has been installed and assigned an IP address. For required additional information about 
actions users can perform, configuration options and tasks that an administrator needs to perform, 
and for how to install the console server and configure the IP address, see the Cyclades ACS 6000 
Installation/Administration/User Guide.
Either the consoles of servers, external modems or Power Distribution Units (PDUs) can be 
connected to serial ports on the ACS 6000 advanced console server. Supported PDUs include 
Avocent PM1000/2000/3000s, Cyclades PM IPDUs, Avocent SPC power devices and Server 
Technology CDUs. Either a PDU or an external modem can be connected to the AUX/Modem port 
if the port is not factory-configured for an internal modem.
The figure that follows shows the console server ports, and Table 1.1 describes how they are 
numbered (for use during configuration).