ASUS TS300-E5 사용자 설명서

Chapter 2:  Hardware setup

2-20

2.  Press the dummy cover into the slot 

opening until the hook tab clicks in 

place.

3.  When installed, the dummy cover 

appears as shown.

The HDD dummy covers come pre-installed on the front panel bezel. In case you 

removed the covers, follow these steps to re-install them.
To install an HDD dummy cover:

1.  From the inside of the front panel 

assembly, insert the flat end of a 

dummy cover into the slot as shown. 

The end with the hook tab should be 

close to the front panel LEDs.