Toshiba PT930 사용자 설명서
O
PERATING
B
ASICS
4-9
3.
Lay the CD/DVD, label side up, in the drawer.
Figure 4-9 Inserting a CD/DVD
NOTE: When the drawer is fully opened, the edge of the computer will
extend slightly over the CD/DVD tray. Therefore, you will need to turn
the CD/DVD at an angle when you place it in the tray. After seating the
CD/DVD, however, make sure it lies flat, as shown in figure 4-9.
extend slightly over the CD/DVD tray. Therefore, you will need to turn
the CD/DVD at an angle when you place it in the tray. After seating the
CD/DVD, however, make sure it lies flat, as shown in figure 4-9.
CAUTIONS: 1. Do not touch the laser lens. Doing so could cause
misalignment.
2. Do not keep foreign matter from entering the drive.
Check the back edge of the tray to make sure it carries
no debris before closing the drive.
no debris before closing the drive.
4.
Press gently at the center of the CD/DVD until you feel it click into place. The
CD/DVD should lie below the top of the spindle, flush with the spindle base.
CD/DVD should lie below the top of the spindle, flush with the spindle base.
Using optical media drives