Liebert 3000VA 사용자 설명서

This section describes replacing the internal battery pack, precautions, checking the Liebert GXT3’s 

status and checking UPS functions.

The Liebert GXT3 is designed to allow the user to replace the internal battery pack safely. Refer to Table 7 
for internal battery pack part numbers for Liebert GXT3 UPS:

Read all safety cautions before proceeding. Contact your local dealer or Emerson representative to 

obtain the part number and pricing of the appropriate replacement battery pack.

1. Gently remove the front plastic bezel cover from the UPS.
2. Loosen and remove the six screws on the battery door, as shown in Figure 21. 
3. Lay the battery door and screws aside for reassembly.

4. Gently pull the battery wire out and disconnect the battery plug and battery receptacle, as shown 

in Figure 22.

The battery can present a risk of electrical shock and high short circuit current. The following 

precautions should be observed before replacing the battery pack:
• Remove rings, watches and other metal objects.
• Use tools with insulated handles.
• Do not lay tools or other metal objects on the batteries.
• If the battery kit is damaged in any way or shows signs of leakage, contact your local 

Emerson

®

 representative immediately.

• Do not dispose of batteries in a fire. The batteries may explode.
• Handle, transport and recycle batteries in accordance with local regulations.

Liebert GXT3-700RT230

GXT3-5A48BATKIT

1

Liebert GXT3-1000RT230

GXT3-5A48BATKIT

1

Liebert GXT3-1500RT230

GXT3-7A48BATKIT

1

Liebert GXT3-2000RT230

GXT3-9A48BATKIT

1

Liebert GXT3-3000RT230

GXT3-9A72BATKIT

1