Manualsbrain.com
  1. 매뉴얼
  2. 브랜드
  3. Fujitsu
  4. P3PC-1492-04ENC2
  5. 사용자 설명서

Fujitsu P3PC-1492-04ENC2 사용자 설명서

다운로드
페이지 중 187
 
 
102
• The value for custom paper is higher than the maximum scan size.  Width needs to equal 
279 mm or less and length needs to equal 420 mm or less. 
• The value for custom paper is higher than the maximum scan size.  Width needs to equal 
11 inch or less and length needs to equal 16.53 inch or less.  
• The value for custom paper is higher than the maximum scan size.  Width needs to equal 
xxx pixel or less and length needs to equal xxx pixel or less. 
Cause: 
A value exceeding the limit applicable to the scan area of the scanner 
was specified. 
User response: 
To specify a custom paper size, specify the value that is smaller than 
the value applicable to the device. 
 
• The value for custom paper is greater than the maximum scan size. Width need to less 
equal 259mm. 
• The value for custom paper is greater than the maximum scan size. Width need to less 
equal 10.24inch. 
• The value for custom paper is greater than the maximum scan size. Width need to less 
equal 2048pixel. 
Cause: 
A value exceeding the limit applicable to the scan area of the scanner 
was specified. 
User response: 
To specify a custom paper size, specify the value that is smaller than 
260mm (10.24inch, 2048pixcel) 
 
• The resolution must be less or equal to xxx dpi when scanning in Gray Scale. 
• The resolution must be less or equal to xxx dpi when scanning in Color. 
• Cannot specify Long Page Scan. Width need to less equal 400dpi. 
Cause: 
There is a limit on the resolution when gray-scale scanning, long page 
scanning or color scanning is used. 
User response: 
Specify a resolution value that is below the indicated xxx dpi. 
 
• Cannot specify Gray Scale with Custom resolution.  
• Cannot specify Color with Custom resolution. 
Cause: 
Custom resolution was designated when Gray Scale or Color was 
designated. 
User response: 
Designate a resolution value other than Custom. 
 
• Cannot specify Gray Scale with duplex document. 
Cause: 
Duplex scanning is specified with Gray Scale specified. 
User response: 
At duplex scanning, select Black/white binary or Half tone for the 
[Image type].