Wizard Ca Co CPT-8061 사용자 설명서

 

 

 
 

 

 

Important Note!!!  

 

You must complete the steps in this chapter only if your scanner components 

have not been delivered pre-configured from Furniture Wizard Software.  
Once you have successfully completed the tasks outlined in each section of this 
chapter, you can proceed to Chapter 3: Using Wireless Scanners with Furniture 

Wizard to learn how to use hand-held scanners to capture and transmit inventory 
and sales data to Furniture Wizard. 

 

 

 

Prior to using the CIPHER Lab CPT-8061 hand-held scanner with Furniture Wizard, you must 

first install and configure the necessary hardware and software components. This chapter 
leads you through the required tasks, which include installing hardware, uploading the 

required interface software, configuring each scanner and then enabling scanner use in 
Furniture Wizard. This chapter includes the following sections: 

ƒ 

4.2  Installing the Required Hardware - This section covers the preparation and 

installation of Access Point and the CPT-8061 wireless scanners. 

ƒ 

4.3 Uploading Firmware Update to Scanners - This section explains how to 
upload the firmware update to each wireless scanner that allows them to “talk” to 

Furniture Wizard. 

ƒ 

4.4 Pairing Wireless Scanners with Access Point - This section explains how to 
pair each wireless scanner with each Access Point in the network. 

ƒ 

4.5 Configuring Wireless Scanners - This section covers how to properly configure 
each of the wireless scanners so they can communicate with Access Point and 

successfully transmit collected data to Furniture Wizard. 

ƒ 

4.6 Configuring Furniture Wizard for Scanner Use - This section covers how to 
configure the Furniture Wizard software to use captured data collected from the 

wireless scanners.