Epson ActionScanner II 사용자 설명서
3-12
Capturing Images From Within Applications
Saving and deleting an image type
To modify an existing image type, select it from the Image Type
Name menu and change the necessary settings. Click Save and
then click OK.
Name menu and change the necessary settings. Click Save and
then click OK.
To add a new image type, select an existing type that closely
resembles the one you want to create. Then delete the existing
name from the Image Type Name field and type a new name.
Change the displayed Image Type settings as necessary. Click
Save and then click OK.
resembles the one you want to create. Then delete the existing
name from the Image Type Name field and type a new name.
Change the displayed Image Type settings as necessary. Click
Save and then click OK.
Note:
If you don’t click Save before you click OK, the image type settings are
not changed.
If you don’t click Save before you click OK, the image type settings are
not changed.
To delete an existing image type, select it from the Image Type
Name menu and click Delete; then click OK.
Name menu and click Delete; then click OK.
Modifying the Destination
The Destination dialog box allows you to define different
resolutions for each destination output device. You can also use
it to modify, add, or delete a calibration profile for your output
device.
resolutions for each destination output device. You can also use
it to modify, add, or delete a calibration profile for your output
device.