Epson ES-600C 사용자 설명서

Follow these steps to remove your computer’s cover:

1. Turn off the computer and any peripheral devices.

2. Disconnect the computer’s power cable from the electrical

outlet and from the back panel. Also disconnect any cables

that are connected to the computer, including the keyboard

cable.

3. Remove the cover. (If you need instructions, see your

computer manual.)

4. Before you touch any of the components, touch an unpainted

metal surface inside the computer’s case to ground yourself

and avoid an electric shock.

Be 

to ground 

in

not

component.

If you are installing an Adaptec SCSI adapter card, skip the 

section on checking jumper setting.

One of the jumpers on your Epson bidirectional parallel

adapter card identifies the port address for your bidirectional

parallel port. Follow these steps to unpack the option card and

check the jumper setting:

1. Unpack the option card. When you handle it, be careful not to

touch any of the components on the circuit board or the

gold-edged connector.