Epson B813152 사용자 설명서
Using Optional Equipment
Page 27
Removing the Shipping Screw
To prevent damage during shipping, a shipping screw is attached to the
TPU to secure its lamp assembly. You must remove this screw before
using the TPU.
TPU to secure its lamp assembly. You must remove this screw before
using the TPU.
1 Turn the TPU so the glass side faces up.
2 Use a Phillips head (cross head) screwdriver to remove the shipping
screw from the hole labeled CLAMP, as shown below.
3 Install the screw in the storage hole labeled STOCK.
You may damage the
TPU if you try to use it
without removing the
screw from the hole
labeled CLAMP.
TPU if you try to use it
without removing the
screw from the hole
labeled CLAMP.