Epson GT-10000 사용자 설명서
1-8
Setting Up the Scanner
R4C345
Rev. C
Rev. C
A5 size
CHAP1.FM
10/7/99
Pass 0
L
Proof Sign-off:
<tantoname>
<tantoname>
SEI K.Ito M.Fujimori
<leadername>
M.Fujimori
<editorname>
SEI G.Hildebrand
Installing a SCSI Interface Board
Unless your PC already has a SCSI board installed, you will need
to install the SCSI board which comes with the scanner along with
a SCSI driver software before installing the scanner driver and
software applications.
to install the SCSI board which comes with the scanner along with
a SCSI driver software before installing the scanner driver and
software applications.
If you already have a SCSI board installed in your PC, go to the
next section.
next section.
Note:
For additional information, refer to the installation guide that comes
with the SCSI board.
For additional information, refer to the installation guide that comes
with the SCSI board.
1. Turn off the computer and any peripheral devices. Unplug
any power cords, then disconnect all cables from the back
panel of your computer.
panel of your computer.
2. Remove the cover from your computer.
w
Caution:
Static electricity can damage electronic components.
Discharge static electricity by touching the metal frame of
your computer before handling the interface board or any of
the computer’s circuit boards.
Static electricity can damage electronic components.
Discharge static electricity by touching the metal frame of
your computer before handling the interface board or any of
the computer’s circuit boards.
3. Insert the interface board into an appropriate expansion slot,
then secure it with the retaining screw.
4. Replace the computer cover and reconnect all cables.