Epson 2450 사용자 설명서

This chapter gives you the basics for diagnosing and solving scanner problems. For 
more troubleshooting tips, see the “Troubleshooting” section of your electronic 
Reference Guide.

The scanner’s indicator light (next to the 

 

] Start button) indicates the status of the 

scanner, as described below. 

Flashing

Green

The scanner is initializing (warming up) or is busy scanning.

On

Green

The scanner is ready to scan images.

Flashing

Red

Check the following, then turn your scanner off and back on to 
reset it:

■ Make sure the transportation lock is turned to the unlocked 

position. See the Start Here sheet for details.

■ Make sure the scanner is properly connected to your 

computer. 

■ If you are scanning transparencies, make sure you’ve 

removed the reflective document mat.

If this does not eliminate the error, the fluorescent lamp may 
need to be replaced or the scanner may have another problem. 
Consult your dealer or EPSON.

Off

—

The scanner is unplugged or turned off.

Perfection 2450.book  Page 35  Tuesday, September 18, 2001  3:16 PM