Epson U12 사용자 설명서

다운로드
페이지 219
To move a jumper from one position to the other, use
needle-nose pliers or tweezers to pull it off its pins and
move it to the desired position. Take care not to lose the
jumper.
C a u t i o n
Be careful not to bend the jumper pins or damage any
surrounding components on the main system board.
Option Cards
An option card is a circuit board you install in your computer
to add a particular 
function. 
Most option cards 
contain a
device, such as a modem, or provide an interface, such as a
serial port.
Your computer has six 16-bit option slots, 
each 
of 
which 
can
accommodate 
an 
option card. You 
can 
buy option cards from
authorized Epson dealers as well as other vendors.
Before you install an option card, check the power
requirements given in the card’s documentation. Make sure
that the power required by the card does not exceed the power
limit for its slot, and that the total power for all the cards does
not exceed the power limits for all six slots. The table below
lists the power limits.
Option slot power limits
 Maximum current
 +5 volts 
 +12 volts 
       -5 Volts and -12 Volts       
For each slot
7 Amps
 1.5 Amps     0.5 Amps
For all six slots
 16 Amps    3 Amps    0.5 Amps
3-6
Installing and Removing Options