Epson U12 사용자 설명서

5. Secure the end of the card to the back of the computer with

the retaining screw.

6. After you replace the computer’s cover, check the

documentation that came with your card to see if there are

any post-installation procedures you need to perform

before you start using the option. If you installed a card

with an additional interface, you may need to run SETUP to

change one of the computer’s built-in interface settings. See

Chapter 2 of the Setup Guide for instructions.

Removing an Option Card

If you need to remove an option card, follow these steps:

1. Remove the screw securing the card to the back of the

computer and pull it straight up and out of the slot.

3-10

Installing and Removing Options