Epson U12 사용자 설명서

4. Make sure the pins in the microprocessor are directly over

the holes in the socket. Then gently push it straight into the

socket, pressing evenly on all sides.

5. Reinstall the CPU card as described on page 3-19.

6. After you replace the computer’s cover, be sure to run the

SETUP program so your computer can update its

configuration. (See Chapter 2 of the Setup Guide for

instructions.) Additionally, if the microprocessor came with

any diagnostic software, you may want to run it to test the

new microprocessor. (See the documentation for

instructions.)

installing a Weitek 4167 Coprocessor

Carefully follow these steps to install a Weitek 4167 math

coprocessor on either the 486DX/33 or 486DX2/66 card:

1. Remove the CPU card as described on page 3-18.

2. Place the card on an anti-static work surface with the

components facing up.

Installing and Removing Options

3-27