Datalogic Scanning PDA 사용자 설명서
User’s Manual
49
Chapter 5
Terminal to FMU Server
Communications
Overview
Prior to installing FMU for the first time, you should set up terminals to com-
municate with FMU. This requires the completion of two steps:
municate with FMU. This requires the completion of two steps:
1. Establish communication from the terminal(s) to the host computer.
Set up a connection using either an RF connection or using Direct
Connect with a Datalogic Dock. See the PRG for your terminal type
for specific information.
Connect with a Datalogic Dock. See the PRG for your terminal type
for specific information.
2. Enable FMU on the terminal. See either
This section covers the following topics:
•
•
•
•
•
•
•
•
•
•