Samsung 700TC 사용자 설명서

  Select Save to save the changes.

  If the system automatically restarts and the Samsung logo 

screen appears, press the Home button 

áᔪ

Ŗᮁ

᜽᯲

ᰆ⊹

ᖅᱶ

 several times.

  Select Security > TPM Configuration and set the TPM 

Device item to Enabled.
Set the TPM State to Enable & Activate.

TPM Device

TPM State

Security Chip State

Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.

Enabled

Enabled & Activate
Clear

Enabled & Activate

Deactivate & Disable

Clear

  Select Save to save the changes.

  The computer automatically restarts. Initialization of the TPM 

chip has been completed. Now, install the TPM program and 

register the TPM program.

You can install the TPM program as follows. Install the program 

according to the procedures below. 

This program is only provided for models with Recovery  and 

the TPM function.

  When the computer is off, press the Power button while 

holding down the Volume (+) button.
Select Recovery to enter software recovery mode.

  Select System Software. If the message box appears, click 

Yes.
The computer boots up in Windows.

  If you move to the Desktop screen, the SW Update program 

runs.
Select TPM Host SW and click Install Now.

If the system software media is supplied with the product, 

you can install the program by using the system software 

media (only when supplied.)

  After the installation, if you click OK, the computer restarts.