Uniden UBC73XLT 사용자 설명서

32

press Func +   or Func +   to step through the 
frequencies.

To release the hold and continue searching, press 
Hold. Or, if you did not press Hold, simply press 
Func +   or Func +   to continue searching.

Note: Because there are many different frequencies 
allocated to police departments, it can take several 
minutes to search all the service frequencies.

You can store frequencies you found during service 
search or service search hold mode into channels.
1. Press Func and Pgm during service search or 

service search hold mode. The frequency and 
the lowest blank channel alternately appear.

2. Press E to store the frequency into the blank 

channel. If you want to select another channel, 
press Func +   or Func +   before you press 
E. You can also use the 0-9 key to select the 
bank.

If you entered a frequency that has already been 
entered elsewhere, the scanner sounds an error 
tone and displays the channel that was duplicated. 
If you entered the frequency by mistake, press Clr 
then enter the correct frequency. To enter the 
frequency anyway, press E to accept.

To begin scanning channels, press Scan. 
The scanner scans through all non-locked channels 
in the activated banks. (See “Locking Out Channels” 
on Page 45 and “Turning Channel-Storage Banks 
On and Off” on Page 44). When the scanner finds a 

UBC73XLT Paper OM.fm  Page 32  Monday, May 14, 2007  9:13 AM