Uniden UBC73XLT 사용자 설명서

42

Follow these steps to store frequencies received 
during direct entry search mode or direct entry 
search hold mode.

1. Press Func + Pgm in direct entry search mode 

or direct entry search hold mode. The frequency 
and lowest blank channel alternate on the 
display.

2. Press E to store the frequency into the blank 

channel. To select another channel, repeatedly 
press Func +   or Func +   to select the blank 
channel you want, then press E. You can also 
use the 0-9 keys to select the bank.

If you enter a frequency that has already been 
entered elsewhere, the scanner sounds an error 
tone and displays the channel that was duplicated. If 
you entered the frequency by mistake, press   . 
To enter the frequency anyway, press E to accept.

The scanner moves to program mode after you 
stored the frequency.

You can skip up to 50 specified frequencies during a 
search. This lets you avoid unwanted frequencies or 
those already stored in a channel.

Note: Search skip frequencies are shared by service 
search, direct entry search, chain search, and Close 
Call modes. If skip frequencies are sent in certain 
mode, the frequencies are also skipped in other 
search modes and Close Call mode.
To skip a frequency, press Func and L/O when the 
scanner stops on the frequency during a search or a 
search hold. The scanner stores the frequency in 

UBC73XLT Paper OM.fm  Page 42  Monday, May 14, 2007  9:13 AM