Uniden UBC92XLT 사용자 설명서

다운로드
페이지 52
15
Setting Up Your Scanner
Setting Up Your Scanner
These guidelines will help you install and use your 
new scanner: 
If your scanner receives interference or electrical 
noise, move the scanner or its antenna away 
from the source.
To improve the scanner’s reception, use an 
optional external antenna designed for multi-
band coverage. (You can purchase this type of 
antenna at a local electronics store). If the 
optional antenna has no cable, use 50-70 ohm 
coaxial cable for lead-in. A mating plug might be 
necessary for the optional antennas. 
Use an optional mono earphone or mono 
headset with proper impedance for private 
listening. Read the precautions on the inside 
front cover of this Owners Manual. 
Do not use the scanner in high-moisture 
environments such as the kitchen or bathroom. 
Avoid placing the scanner in direct sunlight or 
near heating elements or vents.
Using Internal Batteries
You can power your scanner using supplied 
rechargeable AA batteries.
Using Rechargeable Batteries
Before you use Ni-MH or Ni-Cd batteries, you must 
charge them.
The scanner has a built-in circuit that lets you 
recharge Ni-MH or Ni-Cd batteries while they are in 
the scanner. To charge the batteries;
1. Make sure the power is turned off.
2. Slide the battery compartment cover.
UB324 Paper OM reduced size.fm  Page 15  Wednesday, February 2, 2005  8:01 PM