Uniden BC250D 사용자 설명서

1. Press SCAN to begin scanning the

lists you have programmed.

If you haven't programmed more than
2 IDs, ERROR appears on the display.

2. To remove a Scan List from active scanning, press the

number of the Scan List on your keypad.

Press and hold RSM for 2 seconds, the scanner will
move to the next trunking bank.

The Scan List indicator turns Off, and the IDs in that list
are not scanned.

Note: One Scan List must always be active. If you try and

deactivate all the Scan Lists, Scan List 1 will
automatically be active.

3. To restore a Scan List to active scanning, press its

number again.

4. Press SEARCH to return to Trunk Tracking Search mode.

☞ Remember! When you press and hold TRUNK for 2

seconds, you can switch Trunk Tracking modes (Scan or
Search).

Note: • While ID scanning, to change all trunking banks to

the Service Search mode, press SERVICE.

• Selecting a Scan List is also possible in the Menu

mode. (LTR only)

• ID SCAN appears on the display during Trunk

Scan instead of simply SCAN.

55

ID SCAN

 867.9875 NFM

List  1234567890

 

BC250D  11/6/2 11:37 AM  Page 55