Uniden BC296D 사용자 설명서
3:MODE
Select, then set the modulation mode to use while
searching the custom range. If you select 5:AUTO,
the scanner will use the modulation mode most often
used for each band.
searching the custom range. If you select 5:AUTO,
the scanner will use the modulation mode most often
used for each band.
4:ALPHA TAG
Select, then assign an alpha tag to the search range.
5:TRUNK
See “Searching for Trunk Systems.”
4. Press MENU/BACK, then repeat Steps 2 and 3 for
additional search ranges.
Searching for Trunk Systems
1:SEARCH OPTION
→ :CHAIN SEARCH →
2:SEARCH RANGE
→ Select the range → 5:TRUNK
This option lets you search for a Motorola trunking control
channel within the selected range. To activate this function,
select 1:ON, then select an appropriate trunk plan. Most areas
use Plan 1, so this setting should work in most cases.
channel within the selected range. To activate this function,
select 1:ON, then select an appropriate trunk plan. Most areas
use Plan 1, so this setting should work in most cases.
Note: This feature only works for 800 MHz and 900 MHz
Motorola trunking systems.
If the scanner detects a trunking control channel, it will begin
to track that system. The scanner displays the talk group
numbers as they become active.
to track that system. The scanner displays the talk group
numbers as they become active.
32
BC296D(NEW) 10/16/03 6:35 PM Page 32