Uniden BC296D 사용자 설명서
Toggling End Code Detect
At the end of each transmission, a digital burst is sent so that
radios on the system will quickly switch back to the control
channel. Your scanner also listens for this code.
radios on the system will quickly switch back to the control
channel. Your scanner also listens for this code.
2:SCAN OPTION
→ 2:TRUNK → Select the bank
→ 0:END CODE
1:DETECT
The scanner detects the end code and immediately
switches back to the control channel.
switches back to the control channel.
2:IGNORE
The scanner waits for the carrier to drop before
switching back to the control channel.
switching back to the control channel.
53
BC296D(NEW) 10/16/03 6:35 PM Page 53