Uniden BCD396T 사용자 설명서

101

1. Press 

 then turn the scroll control until Close 

Call appears. Then press the scroll control. 

Close Call feature options appear.

2. Turn the scroll control to select an option.

• Close Call Only: Lets you set the scanner 

only for Close Call searching. The scanner 
does not scan frequencies or channels when 
this option is turned on. To select this option, 
press E.

• CC Auto Store: Lets you select whether the 

scanner automatically stores Close Call hits 
into channels. If you turn this option on, the 
scanner starts Close Call mode and stores any 
Close Call hits, up to the maximum you 
specified in the Max Auto Store setting. If the 
scanner stores more hits this setting, it stops 
Autostore operation.

Turn the scroll control to display an option, then 

press the scroll control.

• Set CC Mode: Lets you select the Close Call 

mode. If you turn this option on, the scanner 
sets itself to its Close Call settings about once 
every 2 seconds.

Turn the scroll control to display an option, then 

press the scroll control.

You can also toggle this setting by pressing 

 then 

• Set CC Override: Lets you select how the 

Close Call feature works with other scanning 
activities. If you turn this option off, when the 
scanner detects a Close Call signal, 
CC Found! and E to Listen appear for 

about 3 seconds. Press the scroll control when 
this appears to jump to and hold on the 
frequency.