Uniden BCD396T 사용자 설명서

106

• NOAA WX - the scanner skips known NOAA 

weather frequencies.

• Band 1-10 - select the band where you want to 

screen out broadcast sources.

Program Band - lets you program a specific band for 

broadcast screen. Turn the scroll control to select an 
option then press the scroll control to change the 
setting.

• Band 1-10 - select the band where you want to 

screen out broadcast sources.

Set Lower Limit - turn the scroll control to 

enter the lower limit of the frequency range, 
then press the scroll control to set it.

Set Upper Limit - turn the scroll control to 

enter the upper limit of the frequency range, 
then press the scroll control to set it.

 

 

   

Srch/CloCall Opt 

 

 

Repeater Find 

 

 

This feature sets whether the scanner tries to tune to a 
repeater output frequency during Close Call operation 
when it detects a transmission on a repeater input 
frequency. Since you can normally only hear one side 
of a conversation when you listen to an input frequency 
transmission, turning this feature on can let you hear 
both sides of the conversation.

On The scanner automatically applies repeater 

reverse to detected transmissions. If the scanner 
detects the transmission on the output frequency, it 
beeps, Repeater Find appears, and it remains on 

the output frequency until transmissions end. If it does 
not detect a transmission on the output frequency, it 
remains on the original frequency.