Uniden BCD396T 사용자 설명서

45

You can scan preprogrammed systems more 
efficiently by preventing the BCD396T from scanning 
systems that are not in your area. There are three 
ways to do this:

• Lock out the faraway systems (see “Locking/

Unlocking Systems” on Page 46).

• Reassign your local systems to another quick key 

(see “Editing the System Quick Key” on Page 73).

• Delete the faraway systems (see “Deleting Sys-

tems” on Page 81).

Important! You cannot restore preprogrammed 
systems if you delete them.

To select systems to scan, press Scan then press the 
quick key assigned to the system or systems you want 
to scan. For quick keys 0-9, press the quick key’s 
number. For quick keys 11-99, press   then press the 
quick key’s 2-digit number. To stop scanning the 
system(s), press   (if the quick key is a 2-digit quick 
key) then the number button or buttons again.

The SYS indicators on the display show the systems 
that are currently selected.

To select or lock out a system that is not assigned to a 
key, press and hold 

 while you rotate the scroll 

control until the desired system is selected. Then, 
continue to hold 

 and press L/O to either lock out 

or unlock the system.

Within a system, you can assign groups of channels to 
a group quick key (see “Setting the Group Quick Key” 
on Page 83). 

Follow these steps to activate or deactivate a channel 
group within a system while scanning.