Uniden BCD396T 사용자 설명서

48

3. To quick-store the channel or talk group ID, press 

E. Otherwise, press No.

If you enter a frequency then press E, the scanner 
stores it in the Qck Save Grp group in a system 

called Qck Save Cnv Sys. These are created if they 

do not exist. Then, the scanner prompts you to save 
other channel settings.

If you enter a talk group ID then press E, the scanner 
prompts you to rotate the scroll control to select the 
system where you want to store the ID. The ID is 
stored into a channel group named Qck Save Grp in 

the selected system. Only systems that match the ID 
type are shown.

If you pressed No in Step 3, the scanner prompts you 
to select the system and the group where you want to 
store the frequency or talk group ID.

1. Press Hold to hold on any channel.

2. Press  

+ 

Rcl. The scanner prompts you to 

select the system where the channel is stored.

3. Rotate the scroll control to select the system, then 

press E. The scanner prompts you to select the 
channel group where the channel is stored.

4. Rotate the scroll control to select the group, then 

press E. The scanner prompts you to select a 
channel.

5. Rotate the scroll control to select the channel, 

then press E to hold on that channel.

To monitor trunking activity, press Hold then turn the 
scroll control to select the control channel frequency 
(for a Motorola or EDACS system) or any system 
frequency (for an LTR system). Active talk group ID’s 
appear on the second line of the display.