Uniden BCD396T 사용자 설명서

65

This setting controls whether the attenuator will be on 
or off for the current system. Select your setting then 
press the scroll control.

Off - the attenuator is off.

On - system frequencies are attenuated by about 18 

dB.

Notes:

• Turn on this setting if you are near strong signal 

sources. Attenuation can help reduce interference 
and desensitization that strong signals create.

• You can also turn this setting on or off by holding 

on a trunked system, then pressing 

  +  E.

To enter channels in a system, first set up a channel 
group (or groups) to hold the channels. Then, enter 
the channel and channel parameters in the group(s).

 

 Program System 

  

 

Select the system 

   

 

Edit Group

  

The scanner creates a group with a default name of 
Group nn. nn increments by one for each new group 

you create within a system.

Next, refer to the appropriate section to set group-wide 
options:

• See “Entering/Editing the Group Name” on 

• See “Setting the Group Quick Key” on Page 83

• See “Deleting Groups” on Page 83

• See “Copying Systems” on Page 81