Uniden BCD396T 사용자 설명서

98

2. Turn the scroll control until the type of search you 

want appears, then press the scroll control

 to 

select it. A search band appears.

If all systems are locked out, All Locked! 

appears and the scanner does not store any fre-
quencies.

When you select a search range, the scanner looks for 
active frequencies within that range and Search and 
Store appears on the display’s lower line and the 

system name and search range name appear on the 
display’s upper line. When the scanner finds an active 
transmission, it checks to see if the frequency has 
already been stored in the system. If the frequency 
has already been stored, the scanner continues to 
search. If the frequency has not been stored, it stores 
the frequency into a group named Found Channels, 

then resumes searching. The scanner creates this 
group if it doesn’t already exist.

You can store talk group ID’s into the system you 
selected in “Selecting a System”. Otherwise, the scan-
ner stores talk group ID’s in a new group it creates.

Note: Trunked system search and store does not work 
if an EDACS SCAT system is selected, a system with 
no frequency is selected, the selected system is 
locked out or the quick key for system to which the 
system belongs is turned off, and the group you 
selected to store found talk group ID’s contains more 
talk group ID’s than the maximum set in Max Auto Store.

1. Follow Steps 1-3 under “Selecting a System”. A 

search option appears.

2. Turn the scroll control until the type of search you 

want appears, then press the scroll control to 
select it. A search band appears. If all systems are 
locked out, All Locked! appears and the scan-

ner does not store any frequencies.