Uniden BCT15 사용자 설명서

108

You can store talk group ID’s into the system you selected in “Selecting a System”. 
Otherwise, the scanner stores talk group ID’s in a new group it creates.

Note: Trunked system search and store does not work if an EDACS SCAT system 
is selected, a system with no frequency is selected, the quick key to which the 
system belongs is turned off, and the group you selected to store found talk group 
ID’s contains more talk group ID’s than the maximum set in Max Auto Store.

To store a trunked system, follow the beginning steps in Selecting A System 
above. When you select a Trunked System and press

 

F

 

, the scanner enters 

TGID Search and Store mode.

When you select a trunked system, the scanner looks for active talk group ID’s 
within that range and ID SEARCH AND STORE appears and scrolls across the 
display’s lower line while the system/site name appears on the display’s upper line. 
When the scanner finds an active talk group ID, it checks if the talk group ID has 
already been stored in the site. If it has, the scanner continues to search. If the talk 
group ID has not been stored, it stores the talk group ID into a group named 
Found Channels

, then resumes searching. The scanner creates this group if it 

does not already exist.