Uniden BCT15 사용자 설명서

3

To help you enjoy the features and performance of your BCT15 as fast as possible, 
follow the steps below. See the content of the manual if you need additional 
information.

1.

Mount the scanner and connect power. 

2.

Attach the antenna.

3.

Rotate the [VOL] control clockwise past the click to a midpoint.

4.

Rotate [SQ/STATE] to its minimum position.

5.

Press the [SQ/STATE] knob.

6.

Rotate the Scroll Control knob until your state is highlighted.

7.

Press the Scroll Control knob to set your selection. 

You are now set to receive transmissions from your state. Other states are locked 
out.

Using the chart below, press [POL/DOT], or [HP/B] to receive the type of 
agencies. 

POL includes Police and Sheriff services.

DOT includes the states’ Department of Transportation services.

HP includes the Highway Patrol, State Police, State Patrol, and State intercity.

B activates the BearTracker Warning System and its associated alert feature.

The BearTracker Warning System is a special part of the BearTracker System. This system 
alerts you to transmissions on frequencies used by ‘mobile extender’ radios as well as by 
car-to-car, aircraft-to-car, and other special-purpose frequencies. You receive an audible (beep 
tone) and visual (flashing Alert light) alert whenever you are within an approximate three-mile 
radius of Highway Patrol/State Police units using a mobile extender unit.

[HP/B]

1X

2X

B

3X

HP & B

4X

To lockout a frequency, press [L/O] while
monitoring an active channel.

To toggle a lockout of a trunked system within
the Bear Tracker system, press F + [L/O]

To enable attenuation of a strong signal,
press F + [7]