Uniden BC-RH96 사용자 설명서

5

To reset the BC-RH96 to factory default settings, 
follow the sequence below. Note that once done, there 
is no undo and all programmed keys are reset.

With the unit off, press and hold the following keys 
and turn on power at the same time: [2], [9] and 
[HOLD].You see the reset screen below.
If you turn off power 
during reset, the process 
starts again when you next 
turn on the unit.

A self-adhesive clamp/
guide is provided to 
assist you to safely 
route the Remote Cable 
to your target scanner. 
Clean the planned 
location, peel the base 

covering, and firmly 
press it on the scanner. 
Then route the Remote Cable through the guide. This 
helps assure that the remote Cable will not come out 
of the special connector on either a Mobile of Handy 
scanner.