Uniden BCD996T 사용자 설명서

130

If you experience difficulty while in TrunkTracker™ mode, try the following steps.

Scan won’t start.

You must press 
[SCAN/SEARCH] to scan.

Press [SCAN/SEARCH].

The squelch might need to be 
adjusted.

Adjust the squelch threshold. See “Turning 
On the Scanner and Setting the Squelch” 
on Page 45.

One or more channels might be 
locked out.

Make sure the channels you want to scan 
are not locked out.

The antenna might need to be 
adjusted.

Check the antenna connection.

Weather scan doesn’t 
work.

The squelch might need to be 
adjusted.

Adjust the squelch threshold. See “Turning 
On the Scanner and Setting the Squelch” 
on Page 45.

The antenna might need to be 
adjusted.

Check the antenna connection.

There might not be a NOAA 
weather broadcast in your 
area.

Move to an area with a NOAA weather 
broadcast.

Scanner won’t track a 
trunked system.

The system might not be one 
your scanner can scan.

Change to another system and try 
scanning that system.

The data frequency might be 
missing.

Enter the data frequency. 

The scanner might need to be 
changed to a Type 1 scanner 
setup.

Change to a Type 1 scanner setup. See 
the programming instructions on the web 
at www.uniden.com/scanners.

The system you are trying to 
scan might be LTR or 
EDACS.

Set the scanner to scan LTR or EDACS 
systems. See the programming 
instructions on the web at 
www.uniden.com/scanners.

No ID’s have been 
programmed.

Program one or more ID’s or use the ID 
Search mode.

The ID’s you have stored are 
not active.

Wait for the ID’s to become active or scan 
another system.