Uniden BCD996T 사용자 설명서

21

This section provides you with additional background on how scanning works and 
how your scanner provides that feature. You don’t really need to know all of this to 
use your scanner, but some further background knowledge will help you get the 
most from your BCD996T.

Your scanner’s memory is organized in an architecture called Dynamic Allocated 
Channel memory. This type of memory is organized differently and more efficiently 
than the bank/channel architecture used by traditional scanners. Dynamic 
Allocated design matches how radio systems actually work much more closely, 
making it easier to program and use your scanner and determine how much 
memory you have used and how much you have left.

Instead of being organized into separate banks and channels, your scanner’s 
memory is contained in a pool. You simply use as much memory as you need in 
the pool to store as many frequencies, and talk group ID’s as desired. No memory 
space is wasted, and you can tell at a glance how much memory you have used 
and how much remains.

With a traditional scanner, when you program it to track a trunked system, you 
must first program the frequencies. Since you can only program one trunking 
system per bank in a traditional scanner, if there were (for example) 30 
frequencies, the remaining channels in the bank are not used and therefore 
wasted. Also, since some trunked systems might have hundreds of talk groups, 
you would have had to enter those types of systems into multiple banks in order to 
monitor and track all the ID’s.

Traditional “Banked” scanners let you select and deselect banks by pressing a 
single digit on the keypad. The BCD996T uses a similar method to turn on and off 
scanning sites and systems. When you program a system or site, you assign a 
quick key (System/Site Quick Key, or SQK) from 0 to 99. You can use the same 
quick key for multiple systems, so that the systems are turned on and off together. 
To turn a system/site on or off, just press the digit corresponding to the assigned 
SQK. For two-digit SQK’s, first press [.No], then enter the two-digit SQK.

The BCD996T lets you assign another quick key to a group of channels within a 
system. This group quick key (GQK) can be from 0-9. To turn on and off channel 
groups, you press 

F

 while the scanner is scanning the system containing the