Uniden UBC3500XLT 사용자 설명서

48

Notes: 

• If you select 0, the scanner stays on the system 

for a minimal time (only long enough to check 
current system activity).

• The default setting is 2 seconds for each system.

• For conventional systems, all unlocked channels 

will be scanned at least once regardless of this 
setting.

• The scanner moves to the next system after the 

hold time expires, any current transmission ends, 
and the channel delay time expires.

 

 Program System 

  

 

Select the system 

   

 

Edit Sys Option 

  

 

Set Delay Time 

  

This setting controls how many seconds the scanner 
waits after a transmission ends before resuming 
scanning. Enter a value from 1-5 or Off, then press E 

or the scroll control.

Notes:

• The default setting is 2 seconds for each system.

• This setting applies to all channels within the 

system.

 

 Program System 

  

 

Select the system 

   

 

Edit Sys Option 

   

 

Set Data Skip 

   

This setting controls how the scanner behaves when it 
stops on a channel that has a data signal.

UB347ZH.fm  Page 48  Thursday, August 31, 2006  11:57 AM