Uniden SC230 사용자 설명서

71

2. Turn the scroll control until Search and Store 

appears, then press E to select it. 

3. Turn the scroll control until the system where you 

want to store the frequencies appears, then press E 
to select it. 

Note: You cannot select a racing system.

If no systems are programmed, or all systems are 
locked out, No System Stored appears. 

You can store frequencies into the system you selected in 
“Selecting a System”. Otherwise, the scanner stores 
frequencies in a new group it creates.

1. Follow Steps 1-3 under “Selecting a System”. 

A search option appears.

2. Turn the scroll control until the type of search you 

want appears, then press E

 to select it. A search 

band appears.

If all systems are locked out, All Locked! appears and 
the scanner does not store any frequencies.

When you select a search range, the scanner looks for 
active frequencies within that range and Search and 
Store

 appears on the display’s lower line and the system 

name and search range name appear on the display’s 
upper line. When the scanner finds an active 
transmission, it checks to see if the frequency has already 
been stored in the system. If the frequency has already 
been stored, the scanner continues to search. If the 
frequency has not been stored, it stores the frequency 
into a group named FOUND CHANNELS, then resumes 
searching. The scanner creates this group if it does not 
already exist.

SC230 Paper OM.fm  Page 71  Wednesday, October 6, 2004  10:51 AM