Uniden BC246T 사용자 설명서

55

• 800MHz Standard - Use for 800 MHz systems that 

use the standard band plan

• 800MHz Splinter - Use for 800 MHz systems that use 

the splinter band plan (typically near international 
borders)

• 900MHz Band - Use for 900 MHz systems
• VHF Band - Use for VHF systems
• UHF Band - Use for UHF systems

Next, refer to the appropriate section to set system-wide 
options. For most settings, you can accept the default. 
However, for the items in bold, you must enter 
information in order for your scanner to scan the system.

• See “Editing the System Name” on Page 63
• See “Editing the System Quick Key” on Page 63
• See “Setting System Lockout” on Page 64
• See “Setting the System Hold Time” on Page 64
• See “Setting the Channel Delay Time” on Page 65
• See “Setting ID Scan/Search (Trunked Systems 

• See “Setting the Base Frequency/Step/Offset (Motor-

ola UHF/VHF Systems Only)” on Page 66 (must be 
set up for VHF or UHF systems)

• See “Editing the Fleet Map (Motorola Systems Only)” 

on Page 67 (must be set up for Type I systems)

• See“Setting the Motorola Status Bit (Motorola Sys-

• See “Setting the End Code Operation (Motorola Sys-

• See “Setting I-Call (Motorola and EDACS Systems 

• See “Setting Emergency Alert (Motorola and EDACS 

• See “Setting Control-Channel Only (Motorola Sys-

• See “Setting System Lockout” on Page 64

BC246T Paper OM 062405.fm  Page 55  Tuesday, June 28, 2005  10:12 AM