Uniden BC246T 사용자 설명서
65
Programming/Editing Optional Settings
Notes:
• If you select 0, the scanner stays on the system for a
minimal time (only long enough to check current
system activity).
system activity).
• The default setting is 2 seconds for each system.
• For conventional systems, all unlocked channels will
• For conventional systems, all unlocked channels will
be scanned at least once regardless of this setting.
• The scanner moves to the next system after the hold
time expires, any current transmission ends, and the
channel delay time expires.
channel delay time expires.
Setting the Channel Delay Time
program system
E
Select the system
E
Edit Sys Option
E
Set DELAY Time
E
This setting controls how many seconds the scanner
waits after a transmission ends before resuming
scanning. Enter a value from 1-5 or Off, then press E.
Notes:
waits after a transmission ends before resuming
scanning. Enter a value from 1-5 or Off, then press E.
Notes:
• The default setting is 2 seconds for each system.
• This setting applies to all channels within the system.
• This setting applies to all channels within the system.
Setting ID Scan/Search
(Trunked Systems Only)
(Trunked Systems Only)
program system
E
Select the system
E
Edit Sys Option
E
ID SCAN/SEARCH
E
This setting controls how the system will be scanned.
Select your setting, then press E.
Select your setting, then press E.
ID Scan
- the scanner only stops on channels you have
programmed into the system.
Menu
Menu
BC246T Paper OM 062405.fm Page 65 Tuesday, June 28, 2005 10:12 AM