Uniden BC246T 사용자 설명서
85
Searching and Storing
searching. The scanner creates this group if it does not
already exist.
already exist.
Storing a Trunked System
You can store talk group ID’s into the system you selected
in “Selecting a System”. Otherwise, the scanner stores
talk group ID’s in a new group it creates.
in “Selecting a System”. Otherwise, the scanner stores
talk group ID’s in a new group it creates.
Note: Trunked system search and store does not work if
an EDACS SCAT system is selected, a system with no
frequency is selected, the selected system is locked out
or the quick key for system to which the system belongs
is turned off, and the group you selected to store found
talk group ID’s contains more talk group ID’s than the
maximum set in Max Auto Store.
an EDACS SCAT system is selected, a system with no
frequency is selected, the selected system is locked out
or the quick key for system to which the system belongs
is turned off, and the group you selected to store found
talk group ID’s contains more talk group ID’s than the
maximum set in Max Auto Store.
1. Follow Steps 1-3 under “Selecting a System”. A
search option appears.
2. Turn the scroll control until the type of search you
want appears, then press E
to select it. A search
band appears.
If all systems are locked out, All Locked! appears and
the scanner does not store any frequencies.
the scanner does not store any frequencies.
When you select a search range, the scanner looks for
active talk group ID’s within that range and ID Search and
Store
active talk group ID’s within that range and ID Search and
Store
appears on the display’s lower line and the system
name and search range name appear on the display’s
upper line. When the scanner finds an active talk group
ID, it checks to see if the talk group ID has already been
stored in the system. If the talk group ID has already been
stored, the scanner continues to search. If the talk group
ID has not been stored, it stores the talk group ID into a
group named FOUND CHANNELS, then resumes searching.
The scanner creates this group if it does not already exist.
upper line. When the scanner finds an active talk group
ID, it checks to see if the talk group ID has already been
stored in the system. If the talk group ID has already been
stored, the scanner continues to search. If the talk group
ID has not been stored, it stores the talk group ID into a
group named FOUND CHANNELS, then resumes searching.
The scanner creates this group if it does not already exist.
BC246T Paper OM 062405.fm Page 85 Tuesday, June 28, 2005 10:12 AM