Uniden UBC3300XLT 사용자 설명서
13
Setup
Installing the Battery Pack
1. Open the cover.
2. Connect the battery pack connector
observing the correct polarity.
3. Replace the cover and press down
until it clicks into place.
Charging the Battery Pack
Use the AC Adapter/Charger
to power the UBC3300XLT
from an AC outlet.
to power the UBC3300XLT
from an AC outlet.
You can use your scanner
while the battery charges.
To fully charge the battery,
leave the AC Adapter/Charger
connected for 14 — 16 hours.
while the battery charges.
To fully charge the battery,
leave the AC Adapter/Charger
connected for 14 — 16 hours.
Note: Disconnect the AC Adapter/Charger from the unit when
charging is complete.
Low Battery Indicator
When the battery pack is low and needs to be charged,
appears on the display. You will also hear a beep every 15
seconds as an audible alert.
appears on the display. You will also hear a beep every 15
seconds as an audible alert.
HOLD/
MAN
CH/
FRQ
FRQ
RSM
SCAN
AIR/STEP
SEARCH
MENU/BACK
L/O
SELECT
MUTE
REVERSE
TRUNK
Use only the supplied AC Adapter
UBC3300XLT OM 5/14/04 3:29 PM Page 13