Uniden UBC3300XLT 사용자 설명서

1. Press MENU/BACK.

2. Select 3:SYSTEM OPTION /

7:DATA SKIP by rotating the VFO
and pressing E.

3. Select 1:ON by rotating the VFO and

pressing E.

When Data Skip is active, your scanner may pause
momentarily on an unwanted signal but will resume
searching in 2 or 3 seconds. The Data Skip feature is
active as well as Scan mode. Data Skip does not function
during AM/WFM band Scan, Chain Search for AM/WFM
band, Priority Scan, and Trunking mode.

If a particular frequency continues to interrupt search
scanning, it is possible to set your scanner to skip the
frequency.

To skip over a frequency, press L/O when stopping at the
frequency you want to skip or when in Search Hold mode.

Note: • You can program up to 200 skip frequencies.

The 201st skip frequency entered
causes the first skipped frequency
to unlock.

• If all frequencies in the search

range are set to skip, a beep
sounds and it moves to Search
Hold mode.
To resume searching:

1) Cancel the Frequency Skip set. 

––– OR –––

2) Reset the Search Frequency range.

To cancel all skipped frequencies, press and hold
L/O for 2 seconds in Search Hold mode.

You can quickly store any frequency you find during Search.

1. During Search, press HOLD/MAN to store or when the

scanner stops on the frequency you want to store.

38

SYSTEM OPTION

 5:PC CONTROL

 6:CLONE

 7:DATA SKIP

UBC3300XLT OM  5/14/04  3:29 PM  Page 38