Uniden UBC3300XLT 사용자 설명서

3. Rotate the VFO to select one type (1:CSQ, 2:TONE

SQ, 3:TONE SEARCH) and press E.

4. To set Tone Lock mode, do the following first, then select

2:TONE SQ in step 3.

1) For Scan mode, select 2:SCAN OPTION /

1:CONVENTIONAL - select the channel number -
3:TONE DATA - 1:CTCSS or 2:DCS by rotating
the VFO and pressing E. With CTCSS or DCS, Tone
Lock ON is set by pressing L/O.

2) For Search mode, select 1:SERVICE OPTION /

2:CHAIN SEARCH / 5:TONE DATA /
1:CTCSS or 2:DCS by rotating the VFO and
pressing E. With CTCSS or DCS Tone Lock ON is set
by pressing L/O.

Note: • To set Tone Lock OFF for either Scan mode or

Search mode, press E instead of pressing L/O on
step 1) or 2) above.

• CTCSS: Continuous Tone Coded Squelch

System.

• DCS: Digital Coded Squelch.

• For example, the scanner shows the following

displays. When Search mode and Tone Search
are selected, the display shows the frequency and
tone data alternately.

• If the Delay feature has been set while in Tone

Search mode, it resumes scanning after a 2 second
delay.

C 001

512.0000 FM

CTCSS 250.3

Bank 1

C 001

512.0000 FM

DCS 025

Bank 1

C 001

512.0000 FM

Bank 1

C 003

512.0000 FM

CTCSS 250.3

UNIDEN Group A

C 003

512.0000 FM

DCS 025

UNIDEN Group A

C 003

512.0000 FM

UNIDEN Group A

Tone SQ ON,
CTCSS 250.3 Hz
setting

Tone Search,
CTCSS 250.3 Hz
detecting

Tone Search,
DCS 025 detecting

Tone Search,
no signal received

Tone SQ ON,
DCS 025 setting

Tone SQ ON,
CTCSS & DCS
non-setting

UBC3300XLT OM 5/14/04 3:29 PM Page 41